#SDS0
"Full Size"
Superstructure
No Lumber
$279.50 + S.H.
With Hardware
8'-0" height x 4'-3 1/2" width

	Sliding Door Superstructure - no lumber $199.50 Superstructure hardware kit $80.00
	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	Heavy gauge "Non-Rusting ALUMINUM used throughout entire door structure (except lumber portion)
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength
	Through punched picket holes at 3" between bar spacing
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops)
	"Concealed Weldments" (at picket channel area underside)
	"Reinforced header channels (Square tubing welded to upper channel inside)
	Self-Cleaning Galvanized overhead door track & fasteners included with all sliding doors
	"Zinc Plated" Superlatch and latch receiver plates hardware included
	"Zinc Plated" adjustable Stay Roller with non-rusting neoprene roller included with all sliding doors
	All necessary screws, lags, bolts, and instructions required to install sliding doors on Lumber barns included
	Door Stop included
	All Slider Doors prepared for latching prior to shipment if request at no charge.

#CBSD4
"Full Size"
Crossbuck Sliding Door $325.50 + S.H.
With Hardware
8'-0" height x
4'-3 1/2" width

	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength
	Through punched picket holes at 3" between bar spacing
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops)
	Counter Sunk Screw Placements (nothing sticking out to scratch wall areas)
	Surrounded Lumber Fascias (channels protect all four edges of lumber panels)
	"Reinforced header channels (Square tubing welded to upper channel inside)
	All lumber treated with water sealer before assembly edges, front, and rear)
	Self-Cleaning Galvanized overhead door track & fasteners included with all sliding doors
	"Zinc Plated" Superlatch and latch receiver plates hardware included
	"Zinc Plated" adjustable Stay Roller with non-rusting neoprene roller included with all sliding doors
	All necessary screws, lags, bolts, and instructions required to install sliding doors on Lumber barns included
	Aluminum Door Stops included
	All Slider Doors prepared for latching prior to shipment if requested at no charge
	Check out the Crossbuck Gossip Gate

#TGSD4
"Full Size"
6" T&G Lumber
Sliding Stall Door
$350.75 + S.H.
8'-0" height x
4'-3 1/2" width

	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	Heavy gauge "Non-Rusting ALUMINUM used throughout entire door structure (except lumber portion)
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength
	Through punched picket holes at 3" between bar spacing
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops)
	"Concealed Weldments" (at picket channel area underside)
	Counter Sunk Screw Placements (nothing sticking out to scratch wall areas)
	Surrounded Lumber Fascias (channels protect all four edges of lumber panels)
	"Reinforced header channels (Square tubing welded to upper channel inside)
	All lumber treated with water sealer before assembly (edges, front, and rear)
	Self-Cleaning Galvanized overhead door track & fasteners included with all sliding doors
	"Zinc Plated" Superlatch and latch receiver plates hardware included
	"Zinc Plated" adjustable Stay Roller with non-rusting neoprene roller included with all sliding doors
	All necessary screws, lags, bolts, and instructions required to install sliding doors on Lumber barns included
	Door Stop included
	All Slider Doors prepared for latching prior to shipment if request at no charge.
	Check out the T&G Gossip Gate.

#TGGSD4
Tongue & Groove
Gossip Slider
$360.75 + S.H.
8’0” height x
4’3 ½” width

	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	Heavy gauge "Non-Rusting ALUMINUM used throughout entire door structure (except lumber portion)
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength
	Through punched picket holes at 3" between bar spacing
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops)
	"Concealed Weldments" (at picket channel area underside)
	Counter Sunk Screw Placements (nothing sticking out to scratch wall areas)
	Surrounded Lumber Fascias (channels protect all four edges of lumber panels)
	"Reinforced header channels (Square tubing welded to upper channel inside)
	All lumber treated with water sealer before assembly (edges, front, and rear)
	Self-Cleaning Galvanized overhead door track & fasteners included with all sliding doors
	"Zinc Plated" Superlatch and latch receiver plates hardware included
	"Zinc Plated" adjustable Stay Roller with non-rusting neoprene roller included with all sliding doors
	All necessary screws, lags, bolts, and instructions required to install sliding doors on Lumber barns included
	Door Stop included
	All Slider Doors prepared for latching prior to shipment if request at no charge.
	Check out the T&G Gossip Gate.

#COOLSD4
Coolbreeze
$388.00 + S.H.
8’0” height x
4’3 ½” width

	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	All Slider Doors prepared for latching prior to shipment if requested at no charge
	Heavy gauge "Non-Rusting ALUMINUM used throughout entire door structure (except lumber portion)
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength
	Through punched picket holes at 3" between bar spacing
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops)
	"Concealed Weldments" (at picket channel area underside)
	"Reinforced header channels (Square tubing welded to upper channel inside)
	Self-Cleaning Galvanized overhead door track & fasteners included with all sliding doors
	"Zinc Plated" Superlatch and latch receiver plates hardware included
	"Zinc Plated" adjustable Stay Roller with non-rusting neoprene roller included with all sliding doors
	All necessary screws, lags, bolts, and instructions required to install sliding doors on Lumber barns included
	Door Stops included

#COOLSD4
SPRFDD
Coolbreeze With Spring Loaded
Fold-Down Panel
$483.00 + S.H.
8'0" height x
4'3 ½" width

	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	All Slider Doors prepared for latching prior to shipment if requested at no charge
	Heavy gauge "Non-Rusting ALUMINUM used throughout entire door structure (except lumber portion)
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength
	Through punched picket holes at 3" between bar spacing
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops)
	Concealed Weldments" (at picket channel area underside)
	Reinforced header channels (Square tubing welded toupper channel inside)
	Self-Cleaning Galvanized overhead door track & fasteners included with all sliding doors
	Zinc Plated" Superlatch and latch receiver plates hardware included
	Zinc Plated" adjustable Stay Roller with non-rusting neoprene roller included with all sliding doors
	All necessary screws, lags, bolts, and instructions required to install sliding doors on Lumber barns included
	Door Stops included

#COOLWSP5
Coolbreeze With
Scuff-Panel
$420.00 + S.H.
8’0” height x
4’3 ½” width

	COMPLETELY ASSEMBLED WITH HARDWARE
	All new close-ratio picket spacing at lower third of door (1” between bars) and a heavy-duty lumber (6” vertical tongue and groove) panel at the lower 2’0” of structure.
	Bar tops are standard spacing (3” between bars) and complete the upper half of door.
	Lower lumber panels can be ordered either horizontal or vertical placement…same low price.
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces.
	Heavy gauge "Non-Rusting ALUMINUM used throughout entire door structure (except lumber portion).
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength through punched picket holes at 3" between bar spacing.
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops).
	"Concealed Weldments" (at picket channel area underside)
	Counter Sunk Screw Placements (nothing sticking out to scratch wall areas).
	Surrounded Lumber Fascias (channels protect all four edges of lumber panels).
	"Reinforced header channels (Square tubing welded to upper channel inside).
	All lumber treated with water sealer before assembly (edges, front, and rear).

#SPRFDD
Fold Down
Sliding Door
$95.00 additional

	NEW!!! EASY-REACH-SPRING ASSIST
	No need to stand on tip-toes, or undo troublesome slide bolt....Simply grasp center picket, pull down, release and open.
	Gossip Panel in "down" position also acts as a chew deterrent.

#CBGGSD4
Crossbuck
Gossip Slider
$335.50 + S.H.
8' 0" height x
4'3½" width

	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	Heavy gauge "Non-Rusting ALUMINUM used throughout entire door structure (except lumber portion)
	Full height 8'-0" Aluminum Vertical Square Tubing on both sides for rigidity and strength
	Through punched picket holes at 3" between bar spacing
	Schedule 40 round ALUMINUM pickets 1" in diameter (bar tops)
	"Concealed Weldments" (at picket channel area underside)
	Counter Sunk Screw Placements (nothing sticking out to scratch wall areas)
	Surrounded Lumber Fascias (channels protect all four edges of lumber panels)
	"Reinforced header channels (Square tubing welded to upper channel inside)
	All lumber treated with water sealer before assembly (edges, front, and rear)
	Self-Cleaning Galvanized overhead door track & fasteners included with all sliding doors
	"Zinc Plated" Superlatch and latch receiver plates hardware included
	"Zinc Plated" adjustable Stay Roller with non-rusting neoprene roller included with all sliding doors
	All necessary screws, lags, bolts, and instructions required to install sliding doors on Lumber barns included
	Door Stop included
	All Slider Doors prepared for latching prior to shipment if request at no charge.
	Check out the Crossbuck Gossip Gate.

wpe15.gif (16308 bytes)

#CBDDNS5
Not Split
Crossbuck Lumber
Double-Dutch Door
Hinged-$409.50+S.H.
8' height x 4'0" width
Slider-$430.50+S.H.
8'height x 4'3½" width

	COMPLETELY ASSEMBLED WITH HARDWARE
	Free Stall Drawings with most Purchases, Nothing to put together, No lumber to cut, No jig-saw puzzle, No loose jangling pieces
	Centers of door panels receive two (2) center strips of 2"x1/8" flat bar placed strategically to create the appearance of a "split" Double Dutch Door.
	Panel of 3/4" BC Plywood bonded with glue and wood screws at back of doors.
	Wood screws installed counter sunk in critical areas for additional strength.
	All Edges surrounded with heavy gauge "non-rusting" Mitre-Cut ALUMINUM channeling secured with wood screws.
	All Lumber "treated" with water sealer before assembly (edges, front, and rear).
	All door hardware included.
	"Zinc-Plated" Super latch and latching receiver plates and hardware included with all doors.
	Smooth surface panels on "interiors" of doors (design on exterior side).
	All Slider Doors prepared for latching prior to shipment if requested at no charge

#LOP
Liftout Panel built
into Sliding Stall Door $45.00

	COMPLETELY ASSEMBLED WITH HARDWARE
	Welding is Performed at Concealed Locations
	Can only be built into Stall Doors at time of manufacturing
	No painting required..Ever!
	Completely Assembled Units - Nothing to Put Together
	Vertical Pickets are 1" Round Schedule 40 Aluminum Tubing
	Picket spacings are 3 inches between bars throughout fold down feature

All Hardware Included With Doors


	Door Trollys		Door Latch


	Aluminum Stops		Stay Roller


	Track